Slide Dip switch 2.54mm Red/Blue replace SAB 2 position 4 position 8 position push button,DIP switch can be defined as an array of simple two terminal On-Off electromechanical switches (Single Pole Single Throw) that are commonly used in electricity operations. 

• Picture of Slide Dip switch 2.54mm Red Blue replace SAB 2 position 4 position 8 position push button

  

• Datasheet of Slide Dip switch 2.54mm Red Blue replace SAB 2 position 4 position 8 position push button

• Details of Slide Dip switch 2.54mm Red Blue replace SAB 2 position 4 position 8 position push button

  
  

       1).Material:

       a.base:UL94V-0 PBT Thermoplastic black

       b.cover:UL94V-0 PBT Thermoplastic red,blue

       c.button:UL94V-0 PBT Thermoplastic white

       d.terminal:copper alloy plating

  
  

       2).Mechanical:

       a.operating force:0.2kgf(max)

       b.stroke:2.00mm

       c.operation temp:-20℃~+70℃

       d.storage temp:-40℃~+85℃

  
  

       3).Electrical:

       a.electrical life:2000 operations per switch 24VDC,25mA

       b.Non-switching rating:100mA,50VDC

       c.Switching rating:25mA,24VDC

       d.the contact impedance A:initial value of the maximum 50mΩ, B testing after the maximum 100mΩ.

       e.insulation resistance:(at 500VDC) 100mΩ min

       f.dielectric strength:500VAC/1minute

       g.capacitance:Max 5 pF

       h.the loop:single contact single selection

  
  

       4).the loop:single contact single selection:

      a.for best results,please follow these recommendation:keep all swith contacts in their "OFF" position for all operations

      b.wave soldering:recommended solder temperature at 250±5℃,3-5 seconds.

      c.hand welding:use 30 watt iron control temperature at 320℃.the welding time is about 2 seconds.

      d.cleaning:cleaning process using ultrasonic method,can give better results,use steam mode,temperature should not exceed 51℃.

  
  

      5).Dimension
  

    

  part number	position	DIM.A.(mm)
  MX 1001-1P	1	3.90
  MX 1001-2P	2	6.64
  MX 1001-3P	3	9.18
  MX 1001-4P	4	11.72
  MX 1001-5P	5	14.20
  MX 1001-6P	6	16.80
  MX 1001-7P	7	19.34
  MX 1001-8P	8	21.88
  MX 1001-9P	9	24.42
  MX 1001-10P	10	26.96
  MX 1001-12P	12	32.04

  
  

• Packing of Slide DIP switch red blue replace SAB 2.54mm push button

     1.we pack the DIP Switch with IC TUBE or Tape and Reel,so keep the goods are in high quality when delivery.


     2.we pack the DIP SWITCH with three steps,inner is tube or tape and reel,little box,outer is carton.

     3.we pack the DIP SWITCH as your special requirements.

part number	Quantity/tube	Quantity/reel
MX 1001-1P	120	800
MX 1001-2P	70	800
MX 1001-3P	50	800
MX 1001-4P	40	800
MX 1001-5P	33	800
MX 1001-6P	28	800
MX 1001-7P	24	800
MX 1001-8P	21	800
MX 1001-9P	19	800
MX 1001-10P	17	800
MX 1001-12P	14	800

• Why buy Slide DIP switch red blue replace SAB 2.54mm push button

  1)DIP switches are an alternative to jumper blocks. Their main advantages are that they are quicker to change and there are no parts to lose.

  2)In a universal remote control, the DIP switch is used to set the frequency according to the device that is being operated. 

  3)On a computer motherboard, DIP switches help in optimizing the clock speed and configuration settings according to the type of processor mounted. 

• Production application

  
  

  

• Noted:

• Dear friend,thank you very much for you pay attention to this type,please feel free to contact Angelo at any time,I will give you a quick reply and try my best to do all the thing well.